Skins für PlayStation 3

CONAPIKA Schutzfolie für Sony Playstation Portal, 2 Stück 9H Anti-Kratzen Anti-Fingerabdruck Displayschutz Ultra-klar Hohe Empfindlichkeit Anti-Bläschen Panzerfolie Gehärtetes Glas Displayschutzfolie

Head Case Designs Offizielle The Dark Knight Batman-Plakat Wichtige Kunst Vinyl Haut Gaming Aufkleber Abziehbild Abdeckung kompatibel mit Sony Playstation 4 PS4 Slim Console

BROTECT Panzerglasfolie für Sony Playstation Portal (6 Stück) Schutzglas Schutzfolie [Extrem Kratzfest 9H, Anti-Fingerprint, Ultra-Transparent]

XIAOBAN Displayschutzfolie für Sony Playstation Portal Remote Player, gehärtetes Glas, kratzfest, Anti-Fingerabdruck, kristallklar

QINOUK Schutzfolie für Sony PlayStation Portal, [2-Pack] Gehärtetes Glas Schutzfolie, HD Displayschutzfolie, [Anti Kratzer] für Sony PlayStation Portal

Skin kompatibel mit Sony Playstation 5 PS5 Controller Folie Sticker Spider-Man Logo Marvel

Skin kompatibel mit PS5 Sony Playstation 5 Digital Edition Folie Sticker Mauer Offizielles Lizenzprodukt Fußball

PS5 Silikon Controller Case, Pink PS5 Controller Skin, Playstation 5 Controller Skin

Skin kompatibel mit Sony Playstation 4 PS4 Pro Folie Sticker Pastell Licht Rauch

PlayStation 3 PS3 Controller Sticker - Aufkleber Schutzfolie Skin für Sony Playstation DualShock 3 Wireless Controller Battle Torn Stripes

Install
1) Clean your P S3 Controller surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease that is on the unit P R I O R to installation.
2) Peel one piece of the Skin from the paper liner. N O T to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a decal sticker piece is not going on straight, you can gently lift the sticker back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be N O air bubbles left under the sticker skin. Any air that may become trapped under the sticker skin during installation will go away in time. You can also use a pin to break it.
6) During the cold weather or for a better result, apply hot air to the decal surface to activate chemical agent after putting the sticker skin on your Controller. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Using a hair dryer or hot air gun is fine.

Note
Due to occasional heat, cold, or moist conditions at warehouse or during shipment, a few decals may lose some stickiness and cause peeling after applying. Please contact us directly by clicking Contact Seller button on Amazon order page. We stand behind our products and guarantee you a satisfactory solution.

Disagu Design Skin für Sony PS3 Controller - Motiv Camouflage Pink

Sony PS3 Playstation 3 Super Slim Skin Design Foils Aufkleber Schutzfolie Set - Grey Wood Motiv

Mit diesem hochwertigen Set aus Designfolien für Ihre Playstation 3 Super Slim Konsole und zwei Controllern sind Ihnen staunende Blicke sicher.

- Die Vinyl Skins sehen nicht nur gut aus, sie schützen die P S3 Super Slim und die Controller auch vor Kratzern und ähnlichen Beschädigungen. Denn bei Nichtgefallen lassen sich die Folien rückstandslos wieder entfernen.
- Das Set beinhaltet Aufkleber für die Oberseite der Konsole (siehe Abbildung) und zusätzlich 2 Skins für die Controller.
- 100% Passgenauigkeit für Konsole und Controller
- U V resistent - Farben bleichen nicht aus
- Blasenfreies Aufbringen
- Direkt nach Bestellung (bis 15. 00 Uhr) wird versendet (täglicher Versand von Montag bis Freitag, dazu Samstagvormittag).
- Der Versand innerhalb von Deutschland ist K O S T E N L O S!

With this high quality set of design foils for your Playstation 3 Super Slim console and two controllers everybody will be astonished of your individual Playstation 3 Super Slim.

- The vinyl skins does not only look good, they protect the P S3 Super Slim and the controller also from scratches and similar damage. If you want to change the design or are not satisfied, the foils can be removed without residue.
- This set includes stickers for the top of the console (please have a look at the picture), plus 2 skins for the controller.
- Fits 100% perfect for console and controllers
- U V resistant - colors do not bleach out
- Bubble-free application
- All orders before 15. 00 / 3pm will be shipped the same day from Germany (daily shipping from Monday to Friday, also Saturday morning).

Schutzfolie für Playstation 3 Controller- "Big Ballin"

PS3 Slim PlayStation 3 Slim Skin Aufkleber PVC für Konsole + 2 Controller / Pads Schutzfolie Aufkleber Cover Art Leder Wirkung

PlayStation 3 PS3 Controller Sticker - Aufkleber Schutzfolie Skin für Sony Playstation DualShock 3 Wireless Controller Battle Torn Stripes

Install
1) Clean your P S3 Controller surface as thoroughly as possible. Use rubbing alcohol on a lint-free cloth to remove any grease or other contaminates. Most issues of non-sticking are due to some type of oil or grease that is on the unit P R I O R to installation.
2) Peel one piece of the Skin from the paper liner. N O T to let the adhesive side touch anything.
3) Determine the placement, apply the Skin to the surface using your fingers or the side of your thumb, starting from one corner and working your way across the surface.
4) If a decal sticker piece is not going on straight, you can gently lift the sticker back up. Do not stretch it from its original size.
5) If installed slowly and carefully, there should be N O air bubbles left under the sticker skin. Any air that may become trapped under the sticker skin during installation will go away in time. You can also use a pin to break it.
6) During the cold weather or for a better result, apply hot air to the decal surface to activate chemical agent after putting the sticker skin on your Controller. Especially heat up the edge surface. Allow at least 3 hours for cool down before touching the decal sticker skin. Using a hair dryer or hot air gun is fine.

Note
Due to occasional heat, cold, or moist conditions at warehouse or during shipment, a few decals may lose some stickiness and cause peeling after applying. Please contact us directly by clicking Contact Seller button on Amazon order page. We stand behind our products and guarantee you a satisfactory solution.

atFoliX Skin kompatibel mit Sony Playstation 3 Slim, Designfolie Sticker (FX-Wood-Teak), Holz-Struktur / Holz-Folie

Sony Playstation 3 Slim Skin ( F X-Wood-Teak Design) Neben einem stylischen Aussehen und dem W O W!-Effekt, bieten die Designfolien aber auch einen maximalen Schutz vor Beschädigungen wie Kratzern und blinden Stellen. Die F X-Wood für  Sony Playstation 3 Slim Designfolien bestehen aus einer mehrschichtig gegossenen P V C-Folie und permanentem Acrylat.
Durch feinste Mikrokanäle in der Klebeschicht können beim Aufbringen eingeschlossene Luftblasen sehr einfach herausgestrichen werden, sodass eine falten- und blasenfreie Montage völlig problemlos möglich ist. Darüber hinaus ist die Folie während der Montage jederzeit repositionierbar und kann zum guten Schluss rückstandsfrei wieder abgelöst werden.

Lieferumfang
1 x  Sony Playstation 3 Slim Designfolie Sticker - F X-Wood-Teak Design
1 x Microfasertuch
1 x Montagewerkzeug ( Rakel)
1 x Montageanleitung

Disagu Design Skin für Sony PS3 Controller - Motiv Pink

9CDeer 1 Stück von Silikon Wassertransfer Schutz Ärmel Fall Abdeckung Haut Hülle Cover Skin + 8 Aufsätze Daumengriffe Analoge Kappen für PS3 Controller Cartoon-Schädel

PS3 Super Slim Playstation Haut-, PVC für Konsole + 2 Controller / Pads Aufkleber-Schutz-Abdeckung Art Leather Effect Kilzone

Skins